FrogLube is a unique formulation of natural ingredients developed by CAPT Larry
Lasky, a retired US Navy SEAL intended for SEAL operators' use in extreme environments.
FrogLube's premium blend was derived from extensive field testing and is now manufactured
to exacting tolerances and designed to withstand some of the most grueling conditions
on earth. When FrogLube treated weapons are employed, fouling is dramatically reduced
and malfunctions are virtually eliminated. FrogLube is excellent at dissolving carbon
fouling and it prevents the formation of rust. It also acts to season the metal
surfaces it is used on and makes future clean-ups quicker and easier. FrogLube has
received the USDA's BioPreferred designation.
FROGLUBE® will not harm the environment. It’s food-grade components can be disposed of without the need for prohibitive HAZMAT controls.
Serious shooters demand performance products that work. FrogLube is the leading Bio-based CLP (Clean, Lube & Protect) product on the market even protecting against direct metal-to-metal components with a unique lubricant that actually works its way into the metal with use. The more you use it, the better the protection and lubrication. It just works!
Used in the field by numerous instructors, operators, shooting sports enthusiasts and by the US Navy Seals, a portion of the profits made on every FrogLube sale go to the following charities:
FROGLUBE®CLP, a bio-based, non-hazardous and environmentally friendly product
WARNING: Always check to make sure the weapon is unloaded, clear & safe before cleaning begins.
Repeated use of FROGLUBE® will reduce the cleaning required and improve the lubrication performance of firearms. Proper application of FROGLUBE® forms a durable coating which rust-proofs firearms and reduces the frequency of cleaning required.
Use standard cleaning tools, and do not be afraid to handle FROGLUBE® with your hands. It is made of 100% biodegradable plant material and will clean & moisturize skin.
We recommend using a microfiber towel, which can be laundered & reused. Use it to wipe off excess FROGLUBE® before shooting.
Before applying FROGLUBE®, wipe down the weapon with rubbing alcohol to remove existing solvents & oil. (this step is recommended, but may be skipped)
Clean all surfaces with FROGLUBE®. You
should eliminate the use of petrochemical based cleaners &
lubricants of opposing chemistry since they offset the benefits of a FROGLUBE® treated weapon.
a revolutionary product. It "seasons" into metal & plastic parts,
and releases with high heat. As the weapon is fired, the FROGLUBE® coating
prohibits carbon, lead, copper and other fouling particles from
sticking and oxidation from occurring. Upon cooling, fouling particles
will not stick to the weapon surfaces that are coated with FROGLUBE®. This
means your weapon will be easier to clean and you don't have to worry
about getting it wet. Rust, salts, or oxidants cannot form on FROGLUBE® coated surfaces.
For best results, the weapon should be warm when applying FROGLUBE® Allow
the weapon to sit in sunlight before & after initial cleanings. (or
use a hair dryer)Though it can be applied at room temperature, heat
increases the absorption rate. We recommend leaving FROGLUBE® on 30-60 minutesthe first two times it is used. Use care when handling heated metal.
The more FROGLUBE® is used, the more it is absorbed which results in strengthening of the FROGLUBE® coating. Maximum
absorption is reached when the application of additional FROGLUBE® results
in excess on the surface. When this happens, the weapon is "fully
treated”. Wipe off the excess and shoot the weapon "dry”.
CLEANING THE WEAPON
Apply a sufficient amount of FROGLUBE® Paste
or Liquid to warm firearm parts. Vigorously scrub the bore and barrel.
Use it on every surface of the weapon. Metal, plastic and rubber will
all benefit from FROGLUBE®
Use FROGLUBE® on
various areas of the weapon that you would normally lubricate with gun
oil. Such areas would include closely fitted and load bearing surfaces
like rails, bolts, lugs & roller bearings. Wipe off any excess FROGLUBE® before
shooting. For moist conditions, salt spray, water, humidity and long
term storage, coat the weapon with a light to moderate covering of FROGLUBE® and do not wipe it off.
After the second cleaning and lubrication with FROGLUBE® you should find your weapon is easier to clean and will require less cleaning frequencies.
Regular use of FROGLUBE®will strengthen it's coating abilities and is recommended for all cleaning, lubrication and preservation of your firearms.
WARNING: IT IS NOT RECOMMENDED TO SWITCH BACK AND FORTH BETWEEN FROGLUBE® AND OTHER PETROLEUM CLEANING PPRODUCTS.FROGLUBE® WILL DISSOLVE PETROLEUM ON CONTACT.